Manual Sliding Gate
Our Manual Sliders offer a low cost solution where access control is not required and for those accesses where limited space prohibits the use of a set of double leaf swing gates. Ideal where gates are opened in the morning and closed at the end of the day.
Available with a range of infills to include vertical bar, steel palisade or ‘V’ weldmesh, twinwire weldmesh or 358 Prison mesh.
Product Specifications
Single Leafs can be fabricated up to 8.0m opening and double leafs up to 16.0m opening.
Can be fabricated to any height ranging from 1.2m high up to 3.0m.
Finish: Hot dipped galvanised to BS EN ISO 1461 and can be polyester powder coated any colour.
Other Gates & Access Control Solutions
-
Our double swing gates have an extremely rigid construction and a modern design incorporating adjustable hinges, drop bolts and an integrated padlockable slide-bolt. -
Cantilever manual sliding gate, open in the morning and close at the end of the day! -
Our Cantilever Sliding gates are fully fabricated off-site to include in-built safety cells, safety pressure strips and drive gear ready to bolt down and commission. -
Offering CAME gate automation equipment and BPT Access Control, all installed by our own in-house fully trained operatives. -
Our Pedestrian Swing Gates are all SHS framed and can be clad to suite the fenceline. Can come with padlockable slide bolt, locinox key lock or mechanical keypad.